Toro Power Lawn Mower "blade disengage" Questions

...disengage the blade idler pulley. At the same time, it will release two springloaded arms with brakes that press on the pulleys at the top of the blade spindles. On top of the mower deck at the back, ...

Blades disengage when they are suppose to engage Cutting grass everything fine,and then I noticed blades were not engaged. stop put handles out to get off mower and blades turned on, pulled handles ...

i have a cub cadet 1045 that the blades do not disengage when i mow in reverse even with the switch off the blades do not disengage even with the safety switch off check the pedal switch

...disengage When I engage the blade the belt engages but when I disengage it the blades stay engaged and I dont know why that is. have you recently replaced the belt? It might be to short. Also, check ...

why does one blade spin after mower is stopped on my John Deere LA135? check your blade brake for that blade,supposed to rub against top blade pulley when blades are disengaged,if its a manual engage ...

...must be in the correct position for the mower to Start, or operate. The Seat switch is one, the Blades Disengaged and the Brake switch. Since it dies when you disengage the brake, the mower ...

...disengage, it takes over a minute to do so. Any thoughts? If its an electric PTO then the switch on the dash is bad, Its a lever type ungagement then the little break shoes that rub on the blade ...

...went to use it and now this. Please help? Thanks Mr. Burke Model is HRA215 I think your mower has a blade clutch. If so, does it surge when the blade is engaged or only when disengaged? Either way it ...

MTD stops running when trying to engage the blades Blades are turning when disengaged, and tractor will stop running when trying to engage the blades..???? unhook clutch at the clutch wire plug see if

...blade not disengage After done with the front yard work, I pulled back the lever controlling the engage/disengage, nothing happed. The blade can't be disengaged. The cable is loose. Any thought? ...