Question about SYMA Toys industrial Toys
...blade is spinning away and the top one sits there limp. What's going on? well firstly you still have warranty on it, get them to replace it.. the blades are controlled by a motor and a gear ...
...blade and you'll be good. If that's not the problem you may have stripped a plastic gear the motor goes on. If you have other dead r/c cars around you might be able to use a gear from one of them to ...
...open and I immediately tried closed the throttle moving the level downwards and the helicopter would not respond, but continued to run at full throttle striking the ceiling and breaking the ...
its new, you have to return it and replace it with another one, try it before going home. Try this, open the board, there are two trimming resistor adjustment, one for the rear motor and the other one
...control the main blade had slipped inside the round part on the shaft. I found that taking the play out of the shaft by pressing or tapping the gear on the bottom to take out the vertical play in the ...
136 questions posted
Usually answered in minutes!
58 Questions
47 Questions