...STK-393-110 it is not a WD52525. What is exact model number on back of set? Mitsubishi sets using the part are rear projection sets-- I have START TO FINISH, STEP BY STEP INSTRUCTIONS FOR REPLACING ...
...STK-393-110" convergence IC Chip. you must have a toshiba tv. easy. with the back off, you will see 2 convergence ic's mounted on big silver heat sinks. and they will say on them stk-393-110. replace ...
IC8C01 INSTALL HOW DO I INSTALL IC8C01 Convergence chip! It should be a STK-393-110 CHIP.Is it located on the middle board or the side board?
...stk 393-110, if u have same electronics skill this would be same projec for u but u also have the option to take the board out and take it to a repair shop , probably u going to pay $50 for labor , ...
...392-570, or stk 393-110, the tv needs to be taken apart and the chips have to be soldered in, a qualified tv repairman could do it, but a consumer could not, and would probably damage the set
Question about JVC Televison & Video
...not turn on. Any idea what the problem could be? hi the problem you have is your convergence ic outputs part #stk 393-110 ther located on the front of tv chek for burning resistors on the same ...
Question about Mitsubishi Televison & Video
...STK-393-110 CHIP IN SETS THAT USE IT--available here for free if you need them. please let me have the info for my mitsubi. ws-7390 I have START TO FINISH, STEP BY STEP INSTRUCTIONS FOR REPLACING THE ...
Question about Mitsubishi Televison & Video
...time. Sunny See my reply to your last posting---The set needs The Stk-393-110 and whichever of the two pico fuses is blown replaced--I have instructions AND photos of what the fuses look like. SD ...
Question about Mitsubishi Televison & Video
...STK-393-110. The chip needs to be replaced and there are about a dozen light blue resistors in front of it that need to be checked also. Considering you can buy the part on Ebay for about 12 dollars ...
...STK-393-110. Check the two fuses as this is an indication of how severe the board damage is. If the fuses on this board are burned, you may have to replace the board altogether. If not read on. ...
721 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
562 Questions
482 Questions
301 Questions