Mitsubishi WS-55511 55" Rear Projection Television "replace fuse" Questions

...replace a fuse either you have a short OR the fuse is a generic one------replacement fuses from say Radio Shack will even if correct amperage and voltage blow for no reason-----most of the fuses in ...

...replace it, before replacing an other fuse. One more thing to say is, never insert a fuse other than specified. The voltage and ampere specification to fuse, will be marked at the circuit board, very ...

...fuse. Re solder all connections around fly back, and replace a little fuse located beside fly back ( is a little brown box), you will See 3 fuses parallel beside fly back; replace fuse 400ma. Thank ...

2wh7rca r54 - blowen fuse after replaced I had same problem as above replaced the fuse, but it ran 2hours and blew, any suggestions, thanks You replaced the fl23 fuse? Did you rember to resolder the ...

...fast acting fuse ? Can I just cut-out fuse body and make-up an inline fuse to alligator clips and clip onto posts in board for a quick test ? Please advise. Thanks. Don hmmmmm can you replace the ...

...replace these items. Thanks This DLP model RCA tv have convergence menu disappearing is very easy to fix just replaced the convergence fuse FL 231 near the FBT also must be resoldering FBT too.U can ...

...to replace the other 2 fuse so i did.Now the tv shut`s off and on and my coverce is gone The three fuses are not the same ones. Sounds like you used the incorrect fuse for FL231 (middle of the

...fuse still blew. Can you help me please mate? I would be extremely grateful. Thanks very much. Regards Darrin - Australia if you are not a tech have one check your tv,the voltage regulator is shorted ...

How to change the fuse on a RCA 35317 television 1. Remove the old blown fuse and order a replacement 2. Replace the old blown fuse with the new fuse Selah :-)

Replaced 2 IC's, (1) 5 amp fico fuse, (2) 3.5 amp fico fuse Picture is still 3D type. So I went back and tested all fuses again and found that brand new 3.5 amp fico fuse was blown. I replaced again ...