Mitsubishi WS-55511 55" Rear Projection Television "protected tv 14" Questions

...PROTECTED PROGRAM by TV-14 Your TV's program rating, also known as parental lockout, is active and set for TV-14 Your set will block any programs broadcasted with this or a higher rating. You need to ...

TV on. It will come on for 5 sec then turn itself off. Then the green light flashes ruffly 14-15 times and comes back on. 5 sec later. It turns itself off again. This cycle will repeat itself forever.

...14 months old. Sony KDS-R60XBR1 60 in. HDTV our attempts to correct: we unplugged set for possible reboot. we also waited ten hours to try again. The TV is in "protect " mode,which means that it is ...

tv turns on but turns off right after. I did the self diag. and the power light blinked twice paused and blinked twice again, then repeated. Advice??? 1.) 2-2 is short protection and usually means one

...Format Displayed: 720p (HDTV) · 480p (EDTV) · 480i (SDTV) Broadcast Format Supported: 720p (HDTV) Digital TV Standard: HDTV - HDTV receiver is integrated. Built-in Tuner: NTSC Aspect Ratio: 16:9 · ...

...14 months but it will not light up, then I put the old lamp back in and the lamp comes on momentarally but then shuts off and the TV never lights up. Why will the TV not light? I also want to know if ...

...14 dollars plus shipping and the same seller sells the pico fuses.............. If you want to attempt this give me a vote here--If you are not able to do it yourself I have suggestions for you about ...

...14/16 in. The model # is TZ50V51 (just in case you need it). [email protected] i need a lenticular screen for my 50 inch GE rear projection tv. model number is 52gw948 and i also need an outer ...

...Tv does not power up, the error code it blinks is 2 blinks a pause and 2 blinks MODEL NUMBER WT-46809: 2,2 is the error code for short protection. The most common reason for this is one of the 2 pico ...

...14 blinks is just the tv trying to turn back on. you may be having to problems with the convergence and the 6 blinks or it may be related because the convergence amps can cause shutdown if they are ...