Mitsubishi WS-55511 55" Rear Projection Television "error code self diagnostic" Questions

...error code is "23" the led light flashes 2 times(blink, blink) pause and then flash 3 times(blink, blink, blink). Let me know the error code, it will help to diagnose where the ...

...error code is "23" the led light flashes 2 times(blink, blink) pause and then flash 3 times(blink, blink, blink). Let me know the error code to narrow down, it will help to diagnose where the fault ...

...Error Code Operational Check To activate the Error Code Mode, while the set is OFF, press the front panel "INPUT" and "MENU" buttons at the same time and hold for 5 seconds. The LED will flash ...

error code (it will repeat it about 10 times) for example: two blinks, a pause, and two blinks (this is the most common error code) Let me know what the error code is and I will tell you what it means

...Error Code, or indicating no problem has occured since the last Initalization. Please do Note: The front panel buttons must be used, NOT those on the Remote Control. ? The number of flashes indicates ...

will not stay on I press the on button and it will click on ,but then turn off no picture or sound First do the self diagnostic test at ctechnicians.com and find the error code.

...error code---most common is 2 blinks, a pause and 2 blinks--set will repeat the code about 10 times. Let me know what the error code is and I will tell you what it means and what may be needed to fix ...

...error code by blinking once followed by 2 blinks. The tv will stay on intermittently. Replace both of your STK ICs will have number on them call mats 1-800-628-1118 for parts they are big black ICs ...

...error code and the unit will not fire-up unless isolated the faulty parts.To confirm if it is the real fault, unplug the unit from the outlet for 15 minutes and then plug it back in and check if the ...

... "Power". Self diagnostic screen's displays its log of error. Please let me know the error code with corresponding numerical value "1" means error has been detected, "0" means no ...