won'e engage While cutting the lawn the blades stopped turning. I replaced both the blades and the deck belt. Tried it again but the blades don't engage - I don't hear anything when I move
...won't let the blades work while you are backing up. If the blades are engaged and you put it in reverse they will stop. You usually have to reset the blades, turn them off then back on, when you ...
...won't disengage. Handle in either position won't disengage blades. If this is a riding mower, then check the cable tension around the belt. I have a craftsman and when I take the deck off ...
Question about Black & Decker Garden
...blade won't do anything. However, the metal spacer directly under the nut IS still locked to the shaft (because of its shape), so you can use a pipe wrench or something to hold that in place and ...
won't start It's an old model with the handle bars, and usually runs like a champ but the last time I used it it started to pull down on the power while the blades were engaged and sounded
...won't move forward or backward (the side lock has been released and the pin at the back is pushed in) 11 months old. check the connecting rod to the tranny. follow the gear handle and you should ...
...won't move in forward or reverse I've already changed all the belts - I think it's a broken spring I had a similar problem with my TroyBilt 50 inch zero turn mower. Was cutting ...
...won't release and it trys to stall the mower....is there an adjustment for the brake pads to make the release the pullies? Sounds like you have a broken spring #148 on diagram, part #169022 that ...
Won't Fully Engage Drive Gears Pulled my mower out today to change the plugs, oil/filter and air filter. Drove around the yard to warm it up and as I approached the spot where I do maintenance, I ...
324 questions posted
Usually answered in minutes!
623 Questions
420 Questions
215 Questions
129 Questions
