Mitsubishi VS-50111 50" Rear Projection Television "tv not turn" Questions

turn on tv but it only does a click like it is going to turn on and then another click bit it wont turn on. Finally a red light is just blinking. Any suggestions, is there a freeze button or code that

...tv turned off and will not turn on If this is a mitsubishi tv, it sounds like you burned out a pico fuse which needs to be soldered into place. power supply circuit defective,repair by professional ...

TV will not turn off with remote or manually I have a Hitachi 46" Rear Projection TV, Model #46F500A, a little over 2 years old. TV just started not being able to turn off with the remote or manually ...

tv will not turn on I have an RCA big screen tv that at first only the remote would not work, but the tv worked. One day the tv shut off (by itsself) and would not turn back on. I replaced the fuse by

...times and the tv turn on if these not work im turn off the tv and turn on and contiunue pressing and releasing the button arrow up in the front pannel of the tv then the tv turn on these work in my ...

...turn the TV on by plugging and unplugging it several times and turning the TV on directly. Now, it's getting more difficult. Page 76 Troubleshooting states: Check the Power Control Setting. What is ...

tv will not turn on, red flashing light comes then turns off tv will not turn on at all. sounds like it turns on then turns right off. tv will not turn on, red flashing light comes then turns ...

tv turns on but turns right off after tv turns on and before the tv lights upit turns back off after a clicking noise happens probably has a cold weld on power board    not expensive to

...turn the tv on this is what it does. Any suggestions? In these older CRT based TV's the first thing to usually go out is the power supply. I had the same thing happen to me were the TV would turn on ...

...turn on the TV. 5. Open the on-screen menu to confirm that the TV is responding again. 6. Turn off the TV and reconnect the devices. 7. Turn on the TV. If ever resetting is no effect then the problem ...