Mitsubishi WS-65315 65" Rear Projection HDTV-Ready Television "tv remote disassembled" Questions

remote. If it apprears to be the buttons, you can disassemble the tv to find the wires that go to the button assembly and unhook there and just use the remote from there on out. You could also repair

...remote control (if any). Turn off the TV, use your thumb to flip through the channel (ch - and ch +) button on the TV. This will free the stuck button. Also, check the channel (ch - and ch +) buttons ...

...TV doesn't power up. Only hear a click on hitting the power on button or from the remote. All the main board fuses are good. I ordered a service manual that should guide me through the disassembly ...

...TV is like new. It is much more complicated than changing batteries on your remote. Many consumers try unsuccessfully to do a convergence repair. I recommend finding someone competent to do it for a ...

TV into 2 pieces so I could move it upstairs. Now it appears that the picture has shifted down by an inch - blank 1 inch at the top, and hidden 1 inch at the bottom. Any help? I would take a good look

TV will cause the convergence to be adjusted. Based on model it can be just pressing the auto convergence option with the remote, But older rear projection TVs (2003 and older) have been known to blow

...TV was great, I want it back. Thanks so much! can the remote move the clors in all 4 directions? If not the convergence ICs need to be replaced. Also check the resistors that power the ICs they are ...

remote sensor on the tv. maybe ut needs to be cleaned? Mitsubishi mounts the remote sensor on a small board that utilizes the mirror. Most of the time I would suggest that the batteries be checked, as

tv in the back of the truck and take it to them...any suggestions to try...I'm at my last straw! How old is this set? If any age, might be time for a replacement, you can get a 50" for under $1000 now

I purchased a Samsung 50"DLP plasma TV and a Denon theater surround aystem from Best Buy 15 months ago. About 2 weeks ago the picture starting going out but the sound would remain on. The screen ...