Mitsubishi VS-55707 TV "set analog digital 4 button" Questions

...set digital channels on my Sony Trinitron system. It will not auto-program on digital on analog. model KD-27FS170 Hi, You need to switch the TV to digital mode before you run the auto-program. Press ...

...analog Sanyo tv hooked up to a dish receiver, now all of the sudden, the words video1 are constantly on the top right corner....the only time it goes away is when I push the volume up or down...then ...

set the switch on the box to match). Then follow the directions for searching for channels with the converter box. You may be able to find a low power analog station still broadcasting. However, you'd

...analog converter box, connect your antenna cable to the converter box. Then pick your output connection. Either set the TV to channel 3 or 4 and connect the coax out from the converter to the TV or ...

...in hdtv. I have cable tv is the tv suppose to be on analog or digital settings I can only get a few channels and they are D-9 and ect. I have a splitter to another tv on the same line and it does ...

...analog tuner, so if you're still using it for off-the-air reception you'll need to be using it with a digital converter. I'm assuming you are, since you say there's a channel number 14-3 being shown. ...

...analog tv with converter box? There are 2 options- Option 1 Connect the coax cables in the following order. 1 From the wall to the input of the converter box. 2. From the output of the converter box ...

...analog VCR + converter box to a digital TV? I have the cable from the rooftop antenna on a splitter. One cable from the splitter is in the ATSC port. The other is connected to "antenna in" on the ...

...analog-to-digital converter box that connects the antenna to the old TV.

0. Hold the remote (with good batteries in it) as close as you can (I was about a foot away, or a little less) to the ...