input button, the analog/digital button, its on channel 3 and still is not working. What to do if you have an all snowy picture (blue screen or the TV displays unusable signal-no signal or no sync) 1
...select AUX to view digital TV. How to I set the TV to AUX? The tv should be on channel 3. Otherwise, you can go to menu on tv, then find "autoprogram" and it will search all available channels. ...
digital cable box or satellite receiver (make sure it?s on) and be sure your TV is set for either CH3 or CH4 (which ever you usually view it on). If you usually view it through video inputs (video1 or
...select cable. Then run channel scan. This is an older TV and will require some time for the system to scan the cable channels and adjust. The process could take up to 20 min. Do not disrupt. Wait fo ...
digital cable box or satellite receiver (make sure it?s on) and be sure your TV is set for either CH3 or CH4 (which ever you usually view it on). If you usually view it through video inputs (video1 or
digital cable box or satellite receiver (make sure it?s on) and be sure your TV is set for either CH3 or CH4 (which ever you usually view it on). If you usually view it through video inputs (video1 or
...digital cable is gold does not usually mean good.) 2. One output from the splitter to the converter box and the other to the input of the VCR. 3. Connect an Audio Video (RCA (yellow/red/white cable)) ...
...input was being used the TV would click off after a few mins.... thus leaving them to think the TV was only good for gaming; by using the RCA inputs. ... of course you can always use the same RCA ...
select the input without a remote control for your TV. You just buy one universal remote control and programme it to match your TV. There are so many models of remote controls are in electronic market
67 questions posted
Usually answered in minutes!
1,423 Questions
661 Questions
607 Questions
562 Questions
482 Questions