Orion VR213 VHS VCR "aux tv" Questions

...TV-000 VCR-000 Cable Box-000 AUX is programmed with VCR code 037 Programming a Device using Code Search: Manually turn ON your device (TV, VCR, Cable Box) Press and "HOLD" CODE SEARCH Press and ...

...AUX ports (to TV) on the VCR and connect the three wires to the AUX ports on the TV (TV input). The two audio wires are to be connected to Audio in and the Video signal to the Video input. If you get ...

...TV. Would appreciate any help I can get. I assume your plasma set has one or more auxillary (component) inputs, and to one of these is where you should hook in the VCR. You will have a video input ...

Poor quality picture I have a poor quality Sky picture through my VCR but the sky picture is fine through the TV Is the TV set on Ch 3 or 4 or are you using Line in/aux?

Look for A/V output from VCR/DVD (yellow, red and white RCA jacks). Connect to matching TV A/V inputs using A/V cables. Both manuals should illustrate this. Usually TV has DVD/VCR/AUX setting to view

should automatically switch over when play is selected. To go over to the VCR channel then select AV1 on the TV input select. ( This may be named different depending what make of TV you have eg. AUX 1

...TV have an aux video input ? if it does just get a BNC (male ) to RCA (female) adapter and a RCA cable if not, you can go to an electronics shack or online seller and purchase a modulator.. a good ...

...of the vcr either hooks up to the tv from the coax out , or from one of the other possible outputs such as rca cables [red, white, yellow] to one of the tv's aux/video/line in or source inputs. ...

TV aux/VCR input connections, you must select this input before anything from the VCR will be displayed. If you've verified hookup is correct, then perhaps something is afoul with the VCR. Try hooking

...tv/vcr button, it has a aux channel. When i turn the vcr on, it displays in the aux channel. The vcr is plugged directly into the tv not the cable. If you have a bad or fuzzy picture when viewing ...