TV starts asnormal (either remote or power button) and runs with no furtherproblems until turned off again. Have been unplugging/replugging forseveral days. look closely at the electrolytic capacitors
or the TV itself. Unplug for a few seconds...replug and power up the TV. Some of these TVs left the factory in the service mode. The fix is pretty simple. Thanks asking and show a few hands of support
Question about Proscan Televison & Video
unplug and replug over over until it does work. Is anyone familiar with this brand TV or others doing the same thing? If so, how do I fix it? Details: My proscan LED TV won't come on but does have the
...stereo the speakers..Can you help me? Unplug the power and replug the power the setting should go back to factory setting.U use the remote to change the tv or manually?Change batteries in the
...unplug tv from power. While unplugged, hold the power button in on the TV, not on the remote! Hold for 10 seconds. Replug the power and try to power it up. If you get no picture, you need a repair. ...
...unplug,replug the tv an hour later might work.But this a temp.fix,must replaced the backlight video board sooner or later. i have a 42 voire flat screen tv looking for a schematic tv turn on then ...
...on vacation, TV worked, came home, TV won't come on, either with remote or manually. What could be the problem? Unplug,replug an hour later see what happen.Power Supply board might need to
...Unplug TV for about 2(two) hours, while the TV is unpluged press the on\off button on the TV every once in a while. Replug electricity and try to turn the TV without the r\c, use the on\off button ...
Question about Planar Televison & Video
...replug searching for signal to get the same "no signal" error. Repeats on all four hdmi ports, with different source and cables (that are known working on visio TV). Also tried unplugging ...
53 questions posted
Usually answered in minutes!
3 Questions
2 Questions
1 Questions
1 Questions