Yamaha RX-V2090 Receiver "speaker shuts amp light stays" Questions

speaker wire connections to see if the amp will stay on. If the problem goes away when disconnecting the speaker wires try this: 1) Check volume level on zone one and zone 2 if connected. If it is too

...does it only shut off on high volume or a loud noise? It's the amp tripping to protect itself. look out for a shorting speaker wire or faulty speaker etc. disconnect each in turn to find out ...

...shuts off, almost as if there is too much power being drawn but I do not have any speakers connected. It appears that all the lights work it just will not stay on. Please help. The clicking noise is ...

amp protects itself from heat, shorts and overloads by refusing to turn on or stay on. Overloads can be from excessive periods of high output and shorts would be wiring issues or a speaker blowing up.

...shuts off audio, even at low volumes. I am wondering what causes the protector light to come on. Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator ...

...shuts off. it is completely unplugged from any other source but the electrical outlet Psgolfer ...I pretty shure you dont need that. It just needs to be reset, its in protect mode.....hold the power ...

...amp; B speaker buttons but it did not help. Any ideas??? Please see the following for an explanation: http://www.fixya.com/support/r5390728-protector_means Thanks, Dan what are the possiblites to ...

...shuts down? Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on. Overloads can be from excessive periods of ...

...down with nothing connected, power it off, connect one speaker or component and power on again. Repeat the process until the amp shuts down and you may have found the bad speaker or other

shuts down again... Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on; or it may turn on but produce no audio