5301 LE 2 Way Car Remote Starter System "alarm unlocking doors" Questions

...the alarm then, it should be locking and unlocking the doors as well. The door lock and unlock wires need to be connected. Are sure that they are connected? Do the door locks work with the

...Doors stay unlocked but alarm keeps sounding off and car wont start. Avital 3100 alarm keyless entry system The armed red light inside car keeps flashing even though doors are unlocked. If I try to ...

...unlocking doors. have a 2005 Ford Mustang 6 cyl coupe. Have a Code Alarm keyfob that locks/unlocks doors, etc. Was working fine till today....new battery in it....when I push button on keyfob to ...

...alarm AND locks the doors. Pressing the unlock button disarms the alarm AND unlocks the doors. If this is not happening either there is an issue with the wiring from the alarm to the car or, with the ...

...doors. This remote should lock and unlock door on same button, if you are describing the 2 button remote. If it is not then it could be alot of things. Does the alarm lock itself? Does the alarm lock ...

my viper 5002 alarm i don't know witch wire's to use off the viper alarm's for the power lock's The door lock wires for the Viper alarm are green (-)lock and blue (-) unlock. The Viper system only ...

Does Viper 5701 VIPER 5701 2-WAY ALARM w/REMOTE START is a transmitter type? I mean does it unlocks the door when we are nearing the door without pressing the unlock button in the remote? and locks it

alarm, it is probably with the tech that installed it. If the doors all unlock after pressing the unlock but many times in a row then that means that the tech has to program double pulse unlock in the

...so I have to use the key to lock and unlock the car door. Unlocking the car door sets off the alarm for 5 minutes. I want to disconnect the car alarm. should be a fuse for it, just remove

...alarm. 1. Put the key in the ignition and turn it to the "on" position. 2. Flip the toggle or hold the push button for at least 5 seconds. 3. The LED. light will stay solid on. 4. Turn the ignition ...