Behringer C1U Microphone "mic boost volume" Questions

...is extremely low. Why? and how can I change that? In the volume control panel look for mic boost and tick the box to boost the microphone volume. It's under options properties/Advanced controls

...mic and the other is microphone boost make sure the Microphone volume is near or at 100 It not too good using microphone boost but you may need to use it a little, if you set it too high you will get ...

mic channels EQ with the following settings. Turn Lows down to about 7 to 9 O'clock Play with Mids to match actual source, but never boost above 12 O'clock Keep highs around 10 O'clock (boosting highs

...Volume and channels for mics are all adequate Add a DI box to clean up/boost the signal of that mic. If all the channels are doing this, get a bigger (more watts) amp so that you have more

...Mic boost. Here is how you set it. Double click on the little speaker icon on your taskbar at the bottom right of your screen. The volume control window will open. Click on options then properties. ...

......select samson mic....make sure set to default.....go into properties ...and boost main volume slider....most mics after install are set quite low and you have to go in and adjust the vol input ...

...a phase issue - which can reduce volume dramatically. there are some programs out there that can boost audio, but if the mic itself is damaged, then take it to an electronics/mic

...mic its boost. In order to get the most out of any micrphone, you need to have a preamp, an equilizer, and an output. The output is your PA system that drumbanger mentioned. But since you are using a ...

...boost ya and to get it in sterio way should be are u running it direct in usb port and u have usb 2.0 outlets corect Hi I too have just bought the Samson mic and well impressed with the results. I've ...

...volume icon in Windows, and see if the mic input is lowered at all. Bring the fader up as high as it can go on the mic. Depending on your sound card, you might also see an icon marked "-20 db pad". ...