Gibson Les Paul Studio Electric Guitar "humming sound amp" Questions

...amp. What do that sound like the problem to you? Melvin Johnson from Alabama. I've included a link which provides information on some of the possible causes for hum in an instrument amp. If all else ...

...humming the moment i turn it on. its a normal low frequency hum. nothing is plugged into it, and when i ajust the volume knobs it does not effect the sound. How can i fix this First thing is to ...

...humming sound. Check the cables that are connected to the monitors. Make sure they are not damaged or loose, and that they are properly connected to the mixer and the monitors. Try using a different ...

...humming low sound in headphones and amp. Likely a filter capacitor in power supply is failing if it has started doing this. SOMETIMES devices have a very small amount of hum normally. Also sometimes ...

only humming or buzzing , no music or sound I can hear the Humming or buzzing, but no music or sound ?? Try different cables. That would be the most simple and cheapest fix.

...amp tube? Blown speaker NO (would not get sound at all) Bad Reverb UNLIKELY (controls would deselect reverb and it would be out of circuit) Bad preamp tube NO (controls have no effect) Bad rectifier ...

...sound. I have tried every combination of switch settings on the amp and my Gretsch 5122 but cannot lose the distortion and hum. Any ideas please? You are using a Gretsch with this? This is a tiny amp ...

My 75 fender champ Hums loudly when I turn it on. The amp was working perfect and today when I turned it on as it warmed up it began to hum and got louder even with the volume @ ''0''. I immediately ...

...sound, there is power to the amp as it will hum slightly when switched on The hum MIGHT be directely from teh power transformer vibrating the chassis RATHER than via the speaker. This is an important ...

...the inputs is short circuit - hence the whining sound , to check disconnect all inputs and Switch-on the Amp if you still hear that whining sound then describe your Amp with more details i can help ...