Behringer XENYX 2442FX Mixer "solo light" Questions

Mackie SR 40 solo light stays on along with the Rude light Check for a defect on the solo switch. The rude lights when ANY solo is on. Sometimes the switches stick mechanically and don't fully come up

...or are they overload lights like on the Mackie mixer. No light comes on when selecting the solo button. Any help would be appreciated They should come on/flash when the associated button is

...solo light blinks Constancy. No sound. I checked the fuses, they seem to be OK. any ideas on what wrong You have likely lost one, probably the +15 volt power supply... This is possibly a shorted ...

...SOLO and in PFL? Is the SOLO LED off? Is the number in the FX window SOLIDLY on and not flashing? My 1204fx effects do not seem to make it to the output stage of the mains plus 7/8 clip light stays ...

...solo indicator light comes on. I have been trying to run XLR, 1/4 line, 1/4 line from ipad, direct line in from roland synth module ...and nothing. I need help As long as your power supply is ...

...solo light is also flashing for no reason...all solo buttons are off. If I put the sliders at unity gain the hums dimishes but gets loud if i reduce or increase the sliders. the mixer is outputting ...

CHANNEL MONTIOR LIGHT WILL NOT STOP FLASHING You've pressed the "solo" button by accident.

solo light on all channels is lit with nothing soloed and soloing or muting a channel has no effect. Something crossed in ribbons or through the path of the molex connectors? A few questions first: 1)

. First do your basic checks,,, try EACH mute button and see the LED light... try each solo button and see that each will light AND also that ANY solo light will cause the RUDE solo light to come on..

the "rude muting" light is blinking That means that one or more of the "SOLO" buttons are down. This is the funtion that sends ONLY the SOLO selected mix to the headphone jack.