...phantom power light does illuminate. Checked all fuses and those are fine The phantom power light wouldn't illuminate unless the unit was powered on. Possibly the main power indicator light is burned ...
...phantom power is turned on . my condensing mic isnt working . at first i thought it was my mic . but then i got a new one and it still isnt working . what is the problem HAve you tried a different ...
...phantom power enabled when appropriate.) None of the other inputs work, either, not even the tape-in. None of the routing buttons do anything. Nothing appears on the LED meters. Rotating the pan, the ...
...phantom power light. I opened it up and noticed that the switching power supply has multiple voltage outputs. You should find +/-15 volts and probably +12 volts an +5 volts as well as the +48 phantom ...
...phantom power but nothing happens on the meter when I speak and there is no sound. Although, I see peak is turned on all the time, even when everything is unplugged . What would you suggest, where is ...
...phantom power switch, the red +48V indicator light comes on on the front. Other than that, nothing. Any expertise you have on this board would be greatly appreciated. The Phantom power comes from a ...
Question about Behringer Music
...power on. Phantom power works(?) I have a Behringer Xenyx 1622 FX mixer. The fuse blew, and now that I've replaced it (with the manufacturers recommended fuse), it does not power on when you flip the ...
phantom power light. I opened it up and noticed that the switching power supply has multiple voltage outputs. We checked the 5-volt regulator which is a 7805, it isn't getting any input voltage to the
Phantom power if it might be on... If that stops the hum, something is the matter with the bypasses feeding Phantom power to those channels... Possible problem might be shorting of one of the coupling
124 questions posted
Usually answered in minutes!
192 Questions
85 Questions
69 Questions
32 Questions