Nordic Track NordicTrack X7i Incline Trainer "treadmill moved wont turn" Questions

weslo cadence treadmill wont work I centered the belt on my tredmill and now it wont move at all. I tighted and loosened the belt. motor runs belt wont move won't turn on

...moving or wont let me choose what i want to do. I have the golds treadmill 410. It makes a unusual humming/grinding noise. When running on it it stops after about 2 minutes if that long. Any

You turn it on, and the display lights, but the belt won't move at all. Does the console count down ? If so and belt wont move then you have a problem with the LCB.

Treadmill....It was working perfectly fine, I moved it to my Garage and plugged it in to use it and the only thing that popped up on the board was the number 7.... it wont turn on it wont do anything.

treadmill quit working. All of the lights and bells and whistles all work but the belt doesnt move and the incline doesnt move. Ive only had it for about 2 years. It was working fine before I moved it

...treadmill on to speed setting 2, and be ready to tighten the side that the belt is closest to.( if the belt is against one side, start with that side) Tighten only 1/2 a turn at a time and watch the ...

...moved upside down. Turned on, it worked. Turned on again, now motor wont start. Also we saw that it was leaking fluid. some times treadmills are liquid cooled with oil, which is probably what you are ...

...Treadmill A2250 is stuck on the 12% incline position and it wont go back down and I have tried to reset it by turning it off, switching the reset button to off and then on or even unplugging it ...

...treadmill ever but it now wont start. It turns on, electrical works, sounds like it going to run but the belt doesnt move. any ideas? Dear Sir:1) Tight the deck belt see the diagram  2) Lube the ...

...treadmill wont run or turn on ? The vibration of the move may have loosen the connectors. Unplug unit remove motor shroud you will see the motor control board pull and reconnect all connections also ...