...light flashes and I donot move Hi. Count the flashes between the pauses, it is a fault code. Try putting free-wheel lever in the correct place. Different numbers of flashes mean different faults. ...
...in free wheel push the scooter forward or backward if it is easy to move then the free wheel is on put it to off. and power on and you should be
...put on power no error lights show just relays clicking but still not moving. When I lift the back wheels up from the ground they can be revolved freely but go in opposite directions. Any suggestions ...
...wheels remain locked and will not spin or free wheel. In drive with the battery in the unit just clicks but does not move, everything works such as lights beeping alarm ect. The electirc motor clicks ...
...charge.The horn works The power eye was flashing a code of "5", so the netural lever was put into the drive position. The eye then was a steady green but scooter still will not move.
Question about Electric Mobility Health & Beauty
...put it to sleep. Try turning the chair off, wait three seconds and power back up, then immediately press the "horn" button. This wakes up most of them. Others you need to power off, turn back on and ...
...put a plate the wrong way during reassembly ...a common mistake... Now with the free wheel working correctly both wheels will move in the same direction when the brake is released either by powering ...
...in free wheel push the scooter forward or backward if it is easy to move then the free wheel is on put it to off. and power on and you should be
18 questions posted
Usually answered in minutes!
136 Questions