Question about SIM2 Office Equipment & Supplies
...Powers up displays Sim2 logo then lamp goes out power light starts to flash and turns off about 3 minutes later. Same thing every time it's turned on. Anyone had the same problem with a simple ...
Question about Panasonic Office Equipment & Supplies
need step by step instructions to set-up memory lens function for PT AE3000 projector so as to be able to switch between 16.9 and 2.35:1 formats LENS MEMORY means that You can save and name the ...
Question about InFocus Office Equipment & Supplies
Infocus X1 Projector started with 3 blinking red lights. Project started with 3 blinking red lights. Replaced bulb, reset to factory settings, but bulb lens cracked, so sent that one back and got ...
Question about InFocus Office Equipment & Supplies
InFocus 4805 - right 1/3 is fine, middle 1/3 dim, left very dim. InFocus 4805 - the right 1/3 is fine, middle 1/3 a little dim, left 1/3 real dim. Very sharp zones. 2.5 years old with 500 hours ...
Question about InFocus Office Equipment & Supplies
LP70 lamp will cycle on and off in 3 min. intervals. LP70 will go through normal power-up and will project for about 3 min. Lamp will then go off but fan will continue to run. After about another 3 ...
...on the top and bottom of the 110 projection screen i have set up when in 16:9 The projector has a 4:3 display panel (1024x768 pixels). When you send information to display in 4:3 mode, the picture ...
...the MENU/HELP, ENTER and down arrow buttons and press the standby/on button. Keep holding down the 3 above butons until the LAMP 0000H appears on the screen. That will indicate that the timer has ...
...Cable I'm trying to find a cable for a CTX EZPro projector. 1 end has a VGA male connection with 3 row of pins (4 of the pins are empty), and the other side is a female connection with 2 rows of ...
Question about ViewSonic Office Equipment & Supplies
ViewSonic PJD5132 machine turns on but there is no picture. Automatically turns of with a red light on the lamp button after about 2-3 minutes. The projector is fairly new (was bought within the past ...
New lamp flashing 3 times I installed new lamp and I still do not get a screen/picture. It will blink green for about 60 plus times then turn red and the lamp/close light will flash green 3 times. ...
46 questions posted
Usually answered in minutes!
33 Questions
22 Questions
14 Questions
16 Questions
10 Questions