Pyramid PR530A 2 Channels Receiver "rotary encoder" Questions

...rotary encoder part number: ASX7004, located on a small board - rotary encoder assembly: AWX7386 ...

...rotary encoder, not a carbon surfaced potentiometer. Anyway, you have to clean the surfaces of that encoder, but it's hard. You have to desolder it from the pcb, take it apart and probably you won't ...

...rotary encoder for an Aiwa AV-DV70U audio/video receiver? There are no markings on the component but the pc board is marked SW101. A schematic would be helpful too. Thanks, George B. The EC16B24304 ...

...turning up or down....any possible splutions The rotary encoder for the volume control is bad. You either have to take it off the board and open it up and clean the contacts, or replace the

...Rotary Encoder, not a volume control. It functions as an input to a microprocessor(computer within your receiver). The encoder shouldn't effect the remote control. If that doesn't work either, the ...

...rotary encoder (volume control ). If you are confident with opening the unit yourself, a spray of contact cleaner into the encoder might help. Ideally u should replace it. OR The volume minus button ...

...rotary encoder only. Wow, it is nice to see rotary controllers becoming more available on the markets these days. I hope that they can get the kinks worked out a little better. That is going to be ...

...Rotary Encoder(what you think of as a volume control) It is not a variable resistor, as in decades past. It is an input to a microprocessor(a computer within your Yamaha). If you require additional ...

...Rotary Encoder or Display Microprocessor IC(computer inside you receiver) I wrote a very detailed seminar ,a VSX49TX, when I worked for Pioneer. If you are interested in having your VSX-60 repaired, ...

ENCODER, ROTARY (MASTER VOLUME) Volume went up and down turning in one direction. About 2 hour job, pull both knobs off, remove cover and front plate to get to volume switch assembly, replacement part