cuts lawn uneven Need to adjust mower deck side to side and front to back.
...front deck. This will allow you to control the height of the front and the back-n-forth movement of the link arm.Position the pry bar with the short "L" section upwards, under the ...
I have a briggs and stratton 550 weedeater, i changed the spark plug, primer bulb and washed the filter. After everything was put back it started and now the engine runs real fast. What can be causing
...front of the deck to the height adjustment bar it has a pine in each end of the bar. disconnect it from the bar and tie it to the deck. this bar is only to be used when changing the drive belt The ...
...front of the mower. Fasten the eye bolt into the 3/16" hole in the mower deck locking it in place with one nut on each side of the metal. Now you have the 1/4" bole protruding through the eye bolt. ...
deck into working position. Measure from a flat floor to the blade ends so they are the same on each side of the machine. Adjust by screwing the hanger threads as required. Blades should be flat as if
...front of the mower. Fasten the eye bolt into the 3/16" hole in the mower deck locking it in place with one nut on each side of the metal. Now you have the 1/4" bole protruding through the eye bolt. ...
...deck with the height selector lever set so the anti gouge wheels suspended in the air. The side to side tolerance is about 1/8" max. Next measure the bottom lip in front and back (center), the front ...
85 questions posted
Usually answered in minutes!
370 Questions
122 Questions
64 Questions
42 Questions
