...display doesn39;t work My Matrix T3X treadmill display doesn't work tight the ribbon cable keypad, clean it +tight the wires connector from display board vs lower board and clean it.2) ...
Question about Exercise & Fitness
...display board, and the front touch buttons, seem all to be entirely dead. So far, I've tried using a fresh set of 4 D cell batteries rather than the power supply, on the obscure theory that ...
Question about Startrac Fitness Products Exercise & Fitness
...display doesn39;t work. Incline and speed switches work but no led display The treadmill works, except for the LED display for the calories, distance and time. Any idea what part needs to be ...
Question about Proform Exercise & Fitness
...39;t work - only on display. Pro-Form Crosswalk 395 - Incline goes up and down with no tread movement. Calibration doesn't work - only on display. test the main board, with the output voltage ...
...39;t know what is wrong with it. help? 1) Try to change the batteries from your model.2) If do not have battery( normally under display board) spray with contact cleaner the keypanel.3) Tight the ...
...39;t work what do i do? adjust the REED switch, see the diagram attached, clean it, and tight the wires connector very well.2) tight the ribbon cables from keypads, tigh the connector from display ...
Question about Epic Exercise & Fitness
...39;t run even though power is on and display works Power is on, incline works, display works, but the treadmill won't work. try to RUN the software calibration for diagnose, troubleshooting, ...
Question about Exercise & Fitness
...display and others don't. Worked fine a few days ago. Thanks Dear Sir:pLEAse lube in according with the instruction manual maintenance you can have deck belt worn 2) Inspect the drive ...
Question about Exercise & Fitness
39;t start. i have a feint memory of havin i could swear one time in the past when i left it sitting i saw online something about resetting the display somehow (using it while holding power button and
Question about Exercise & Fitness
...display doesn't come on at all. 1) Tight the ribbon cable very well, and tight the connector from display board vs. lower board.2) Adjust the REED switch, see the diagram attached.God bless ...
50 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions