...until now. The walking belt goes fine without pressure but stops when i stand on it. This seems to me like a lubrication issue, maybe? How would I go about this and would it fix my problem Remove the ...
belt it stops moving Unplug unit remove motor shroud so you can see the drive belt, plug in unit then start it you will be able to see whether the drive belt or running is actually causing the problem
...Belt stops or slips when i walk on it with item going 2mph, stand on foot rails, hold on handles,with one foot try stopping walking belt-look at front roller while doing this-if walking belt slips ...
...belt. Insert the safety key. Press the "start" key when "CAL/PRSS/STRT" shows on the readout. If readout fails to show the "CAL/PRSS/STRT" symbol, turn off machine and turn it back on. Press "ENTER" ...
Question about HEALTHRIDER Exercise & Fitness
...moving. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller adjustment bolts clockwise, 1/4 of a turn. When the ...
...until the belt is properly aligned. 9. After aligning the belt, press the STOP button and RESET. Turn OFF the treadmill. Tighten any loose fasteners or other components on the equipment. If you hear ...
...BELT. Press the Speed Up key and hold it down until 85 is shown in the Distance window (some models may show the 85 number in another window If the belt does not move in this mode then the controller ...
Question about Proform Exercise & Fitness
...until belt gets centered and snug. When you have it centered you may ahve to tighten or loosen it in case it is slipping when you are running on it. When you ajust it when centered you should do this ...
...belt) 3. Does the yellow MOTOR lamp light while pushing? Is yellow MOTOR lamp on the motor control board lit? 1. Loose wire connection to motor, capacitor, or choke. 2. Loose brush holder screw on ...
42 questions posted
Usually answered in minutes!
36 Questions
38 Questions
9 Questions
4 Questions
