Precor 935 Premium Series Treadmill "shut 20 minutes" Questions

...20 minutes treadmill smells hot and shuts down. Have had for about 1 year. If I let it set for 5 minutes will run for a little bit, smells hot and shuts down again. If you have a carpet under the ...

Walking speed for 2 hours and the machine just shut off would't turn back on for 20 minutes why? The motor has a thermal protection device that will stop the motor if it becomes overheated. Eric

...20 minutes hi 1 reason could be belt and deck(motor draws a lot of amps and belt and deck heats the motor up) just try wax or libricate compatible lube and try (belt and deck lube you can buy from ...

...20 minutes before we lubed it). Could it be the motor? Or is the slight slippage causing this? I had a similar problem. Mine was shutting off and also some of the buttons worked intermittently. I ...

...20 minutes need to reset do a friction test- put key in console,without pressing ANY other buttons, make incline go up to 10. then push yourself off backwards, if diffacult, this is friction,like ...

...20 minutes and it just shut off with no warning. I pulled the key out and checked the power, out had power, put the key back in and got nothing. Does anyone know what is wrong? lube the rollers ...

20 minutes into my workout. A tech come out, made sure the belt was lubricated, and suggested using a 20 amp outlet. Same problem exists. Any other suggestions?? 1) You must NOT use extension cord. 2)

...20 minutes on a rodger black compact treadmill? Dear Sir:Your have a Enough friction between deck vs Deck walk belt, to due a lack of maintenance ,specially for NOT LUBE. The system Shut down for to ...

...tredamill. It has recently been giving him problems. All goes well for 20 - 60 seconds, then it shuts itself down. No error code. The whole thing just shuts down. After a minute or 2 he switches ...

...20 minutes or less. Can I replace the fuse, or what is the problem? try lubricating the running belt. Any decent sized fitness store should have a lubrication kit. Also, make sure the machine is ...