Precor 935 Premium Series Treadmill "rear roller" Questions

...rear roller has to be loosened inwards by using the large allen key to release the tension. The front roller has to be loosened and lifted out of the treadmill (it may need cleaned to take away any ...

...first then tighten rear roller, Rear roller has 2 seperate ajusting allen bolts, 1 on each side, count the turns on each bolt when turning them inward, keep the count even turns on both allen ...

...rear roller bolt" 1/2 turn clockwise. Have done this repeatedly, but belt has not shifted. What to do now? Turn left rear roller bolt in to approximate start positon, then Turn right rear roller ...

...rear roller adjustment bolts, 10 turns each side counterclockwise. Remove the motor drive belt. The front roller should now be removable. If you have difficulties, back off the rear roller adjustment ...

...rear roller my have snapped. what do you think. The sound is almost like a grinding, like there was a piece of something in it. I have removed the cover and there is nothing there. The roller bearing ...

Rear Roller need lubrication. I have narrowed down the noise to my rear roller. How can I lubricate it? see the video attached and proceed according, this is a matter very easy to lube the rollers ...

...rear roller- not all front rollers have this adjustment bolt. 3. Loosen the walking belt at the rear of the treadmill. 4. Remove the front roller adjustment bolt. 5. Some higher end treadmills use ...

rear roller adjustment bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be

...rear roller bolts, on mine their are 2, most tread mills are all the same, remove them 2 bolts, Now locate the front roller bolt, 1 bolt,remove bolt, your belt is going to be very loose now, on the ...

...rear roller may have a bad bearing. The bearings themselves are not replacable. The entire roller must be replaced. You can find the parts lited on iconservice.com and enter EPTL09706 in the model ...