...drive belt (between the motor and front roller) is loose and can't be fixed by tightening the walking belt. If the drive belt is slipping, it needs to be tightened or replaced. I need the brand and ...
...drive belt between the motor and the front roller may be slipping. All drive belts tend to wear with age and will wear more quickly if not aligned properly. Tightening the drive belt according to the ...
...drive belt is loose or the walking belt is old. First, check the tension on the drive belt. If the drive belt is not slipping, then walking belt may need to be replaced. I say may because without ...
Question about Nordic Track Exercise & Fitness
...drive belt on a T6.3 treadmill? After changing the motor how do you install the drive belt? Remove the drive belt Loosen rear roller screws Remove the screw holding the front roller Slip out the ...
...drive belt and motor are staying at the correct speed when the walk belt slips. The most likley cause is the front drive pully on the front roller. This sometimes looses adheshion with the front ...
Question about Reebok Exercise & Fitness
drive belt will require replacement. If yourdrive belt is too loose, it will slip on the front roller pulley or the motorpulley. If it is too tight, it will increase your amp draw to the point thatyou
...drive belt might be loose. To tighten the drive belt, start by removing the front cover. loosen the bolts around the motor then tighten the drive belt by tightening the motor adjuster bolt. Once the ...
...drive belt, plug in unit then start it you will be able to see whether the drive belt or running is actually causing the problem.If it is the running belt then turn both rear roller adjustment bolts ...
Question about Nordic Track Exercise & Fitness
...drive belt is slipping,remove the motor cover,be careful some models have hidden screws in recessed areas underneath if you remove the correct ones the hood comes off easily. There is a bracket that ...
Question about Nordic Track Exercise & Fitness
drive belt will require replacement. If yourdrive belt is too loose, it will slip on the front roller pulley or the motorpulley. If it is too tight, it will increase your amp draw to the point thatyou
25 questions posted
Usually answered in minutes!
346 Questions
56 Questions
48 Questions
44 Questions
