Nordic Track NordicTrack A2350 Pro Treadmill "motor starts stops" Questions

...motor starts exactly for a second and stops. Checked the motor brush it is fine and tried switching the power cables on the controller board, motor runs to high speed with direct current (which means ...

...stops almost immediately after starting a slow walk. It does seem run well with no one on it. I have seen several online sources indicating that I should use a silicone spray on the belt, but the ...

...motor start running and inmediadlly stops. after i installed the board the motor start running and stop some time after start running. I checki the belt adjustment an is right, but i can't set the ...

...motor 'trying'. When I lift my weight off it starts again, but if I get back on it'll stop. If I press the stop button then the start button, it's all fine for a little while (up to 1/2 mile) before ...

...starts then stops. Thoughout the entire thing the digital console stays on so it is NOT losing power. Can you help? 1)Lube the deck belt, this a problem by lack of maintenance, this produce enough ...

...starts again but stops after 5 minutes. hi, Plaese check the Power point Normally all these problems are in relation with motor itself, I mean, internal bearings, short circuit. So if your treadmill ...

...stops. It is plugged into a dedicated outlet. I completely remove myself from the machine. Turn it completely off and unplug it. I then plug it in and start the process again with the same results. ...

...stops but has power While running the treadmill will stop. It will need to be unplugged and rep lugged to start again. Power board next to motor shows power. Any suggestions? the motor could be going ...

Front Load wcvh6260 GE front load washer. Motor will not run. Found that no voltage was going to the motor or inverter from board. I replaced the board. Everything started to run fine including motor.