Question about Sony Audio Players & Recorders
...channels. You can adjust the level up or down in 1/2 dB level increments by toggling left or right with the center button. Each surround channel can and should be adjusted independently and
...surround channel don't work i am the ovner of DENON AVR 887 i connectet my home theather...front left and front right, center speakers. my subwoofer, surround speakers and surround back speakers. But ...
...on the setup menu. Then run either a test tone for all channels or media recorded in surround sound or run in 4 channel stereo to test. Not all media will produce surround effects 100% of the
Question about Sony Audio Players & Recorders
...channel is not recognized on the surround display in any mode and no sound comes out of them. I tested it by moving the speaker wire to the front channel and the speakers work fine. Is there a ...
...Channel My Surround Left Channel has gone bad. I know this because I've tested the Surround Left Speaker in other speaker ports and it works fine. I then put other speakers in the Surround Left port ...
surround mode the 2 rear speakers do not have sound. Is their some adjustment I need to make or is it just shot? Best thing to do is to put the unit in 5 channel or 7 channel mode. That will send left
Question about Yamaha Audio Players & Recorders
...voices are barely audible. I have a ps3 connected and a newer direct tv receiver hooked up with HDMI cables. Some surround modes don't use the center channel. This is where most vocal tracks go
...Surround Channel The left surround channel is not working right. The volume level is very low compared to right channel even when volume is adjusted higher on that channel to maximum. Have changed ...
...channel surround speakers can be elevated above the listening position. For actual visual examples of 5.1, 6.1, and 7.1 channel surround sound speaker set-ups, check out the diagrams from Dolby Labs ...
Question about Yamaha Audio Players & Recorders
...input" jacks on the rear of the receiver? Those inputs Right, Left, Center, Surround R+L, and Sub are used when selecting 6 channel mode. They bypass the receivers surround processor board. John ...
35 questions posted
Usually answered in minutes!
269 Questions
261 Questions
161 Questions
135 Questions
85 Questions