Janome 6260QC Computerized Sewing Machine "bobbin casing seems loose" Questions

...seems to change. When you thread your bobbin in the bobbin case, hold it only by the thread. If the bobbin and bobbin case fall, the tension is too loose. If this is the case, turn the bobbin tension ...

when I spin needle when empty, the hook catches thread however it doesn't catch when bobbin case is input into machine. Bobbin case does seem loose, but cannot get it any tighter. Customer Support ,,,

...thread with something a little higher quality. They also adjusted the spring holding the bobbin case slightly, and now it seems to work fine. I'm not sure how long it will last, but for now I'm

...bobbin case is not sitting in the metal casing tightly, causing the thread to loop and bunch up around it, and on the underside of the fabric. I have tried re-threading it again and again, and taking ...

...seems too loose while the bobbin tension is way too tight. I am attempting to free-machine quilt so the feed dogs are down but the sewing seems very jerky. The machine also seems to have an abnormal ...

...seems to sew too tight loosen it a bit It worked for me, GOOD LUCK I think I know where the loose bobbin case problem in the 9410 comes from. Looking down at the bobbin case, at about 4 o'clock, ...

...bobbin thread) while stitching, as it seems to be very loose. Hello On your bobbin case where you run the thread through the case you will see a plate with a screw on top of the bobbin case. This is ...

bobbin case seems loose. also thread sometimes bunches into little ball. looks kind of frayed. try changing the needlethe bobbin case may need to be replaced or the hook and hook race may also need to

...bobbin stitching is quite loose!! I'm using different coloured threads to help adjust... Sorry but with no make ,model listed we have no idea . Usually, tightening the upper tension will pull the ...

...seems to be working but then when i turn the fabric over the stiching is all loose and loopy. Is the bobbin tension the problem?? Please help! check both upper & lower tensions also check your ...