...attach my fit button-hole foot to my presser foot on my Necchi Sewing Machine Model #3537? Just pull down on the original metal foot. It will snap off and then you can snap on the button hole foot. ...
...attach button hole foot, seems too long for the shank that you attach feet to. Only one hole in the shank and the shank on the button hole foot is too long for the screw hole in the attachment shank. ...
...button hole foot to measure the length of button hole. If this is correct, then there is a lever very near the presser foot bar which needs to be pulled down to be engaged by the bh foot. Let me know ...
...button hole foot, attach foot, reach up on the left side just below the light and pull the lever down, choose the button hole , lower tension to 3 and sew out the button hole. The button hole foot ...
...button hole is to sew backwards the length of the button hole. My machine never stops going backwards. I have selected a button hole pattern, a size, and make sure the wheel on the attachment is in ...
...button hole, lower the button hole lever and GENTLY push it back. Put your fabric in the machine aligning the marks you made. Hold the thread ends and start the machine. The ...
...button hole. I have Singer 7444. Can't use button hole. I have rethread machine, button hole stitch is selected, button hole presser foot is attached, button hole lever is pulled down in between ...
button hole. I've attached the automatic buttonhold foot R but when I press start/stop for the machine to begin making the hole, I get an error message "FC"- meaning the foot control is not connected.
...button hole attachment- installed properly I think - when I push on presser foot an alarm goes off and it will not sew Hi Dot, 1. Make sure you pull the buttonhole lever down- left back of your ...
94 questions posted
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions