Brother PE770 Computerized Sewing Machine "thread lever" Questions

...thread take up lever needs to be closed just a little, take a small piece of fabric and put it over the take up lever and use a pair of pliers to close the take up lever just a little and see if that ...

...lever 2. Thread the lower looper and position the thread on hook of the lower looper threading lever. 3. Push the lower looper threading lever back to its basic position while holding the end of the ...

...lever? are you sure that the thread is threaded correctly into the eyelet/thread guide above and below the take up lever?  If it is an open ended take up lever (many are now) then the thread may ...

...lever, thread the takeup lever right to left and take the thread down any guides to the needle, if the bobbin case goes in the front thread the needle front to back, if the bobbin case goes in the ...

...Thread take-up lever does not move into a high enough position for me to thread cotton through the eye. Help please. You should be able to turn the hand wheel (on the right side of the machine) ...

lever, thread it through the eye of lowerlooper, then slide the lowerlooper threading lever back to the left (lining up the arrows) which returns it to standard position. It's when I return it

...thread is not in the take up lever or it is not in the tension. Rethread the machine. Raise the presser foot and pull on the thread between the tension and take up. It should be loose. Lower the ...

...thread take up lever some machine have that problem, I had to fix that problem on one of my personal machine, , take a pair of pliers and gently close the thread take up lever just enough to stop the ...

...lever My thread keeps falling off of the take off lever. I can re-thread the machine and it will sew fine for about 10 inches and then I hear a loud noise and the machine has dropped the thread from ...

...lever and the thread no longer comes out. Be sure to check your machine--there should be a spring located inside the little finger that is threaded before going through the take-up lever that pulls ...