Proton MM2701VT 27" TV "39 wrong goes" Questions

...wrong we took the board out and changed the convergence ic's when we put it back in and turned it on it goes from 110 volts to 0 every time you turn it on .what have we done wrong Sounds like ...

...39; mode was not set but h it says its a dual make but not sure. Click here and try to download the user manual to your device.  If it is amde by Dual, the manual must be here.  Download it ...

39;s wrong with it? how do I correct it? ALBA tv, turn the tv on, after a few seconds the picture goes but the volume stays on. Might be some loose solder terminal/s at its horizontal output section.&

...39;97. The picture comes ON only occasionally. When it fails to come ON, the standby light blinks continuously. Sometimes, the picture comes ON initially then goes out after several minutes. The ...

...wrong with the tube itself. It could be a short that is only there when the line warms up (10 seconds is plenty considering the amount of power that runs through it) or the CRT has a crack. If you ...

...wrong with the video. Check video out, Q705, 732, 761 and other components on the C board, also check Q218, 219, 220 on the A board. In addition, unit could be in IK blanking, try turning up screen ...

...wrong, if power light (green) comes on and then goes off: PRESS AND HOLD"device" and "menu" buttons on front of tv for at least 5 seconds and thenrelease both together. Watch for power light to blink ...

...39;t control TV volumeThis is almost always caused by a programming problem with the remote. Here are the steps to take to troubleshoot the problem.Press the volume button on the remote. The TV mode ...

...wrong wire. Was an easy fix for a frustrating problem, do not by afraid to try it yourself. Cannot use the buttons on the TV manually, but the remote works as it always has. Thanks to all with great ...