...PCB. Main cause can be any of the printer boards (accessories) are faulty. Or the main controller PCB is faulty. Check all the plugs to and from accessories. Reboot the device. If still faulty, you ...
Question about Canon Office Equipment & Supplies
how can i fix this? Main cause The laser driver/BD PCB is faulty (laser activation failure, BD detection fault). The DC controller PCB is faulty. The image processor PCB is faultly. or drum is faulty
...CodeDetail CodeMain Cause/SymptomCountermeasure E0100000Main motor failure The main motor is faulty. - Check the connector of the main motor. - Replace the main motor. - Replace the DC controller
...Main Cause/Symptom - The heater does not turn on. - A fixing drive motor failure was detected. Countermeasure - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace ...
sysrem error E245 E24x usually relate to main board errors. Comms failure between DC Controller and main Board. EEPROM failure Control panel PCB failure Something like that.
Main Cause/Symptom: - The heater does not turn on. - A fixing drive motor failure was detected. Countermeasure: - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace
...code Main cause The laser driver/BD PCB is faulty (laser activation failure, BDdetection fault). The DC controller PCB is faulty. The imageprocessor PCB is faultly.or drum is faulty. SYSTEM ERROR ...
...main PCB failure? Error light is on, plenty of paper in the tray. Main PCB, where "PCB" stands for Printed Circuit Board. If this board is bad, the printer will not function properly and it will need ...
Question about Canon Office Equipment & Supplies
...main thermistor detected an abnormally high temperature (240 deg C) during temperature control. - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC ...
Question about Fuji Office Equipment & Supplies
...main PCB correctly? Connect the harness between the laser unit and the main PCB correctly. 5 High-voltage power supply PCB failure Is the problem solved after replacing the high-voltage power supply ...
54 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions
