...imaging unit. Last solution turn ON the copier open the front door ,enter in service mode,select sistem1 or 2 ,select IuU Unit,select Unit K ,select new release press start and after job is completed ...
MINOLTA EP1030 IS NOT GIVING AN IMAGE Check the assy. below the image unit. Open the machine pull out the image unit below it on the machine you see a black plastic assy. with machine off press it ...
Question about Konica Minolta Office Equipment & Supplies
...imaging units. Each imaging unit has a waste compartment for the residue toner not transferred to the Image Transfer Belt (the waste bottle is for waste from this ITB). The residue toner could be ...
...last 1/3rd has ghost image from the second 1/3. I do not want to indiscriminately replace units due to expense. Developer cartridges are showing 5/5 to 3/5 available. Photoconductor unit 3/5 Transfer ...
Question about Konica Minolta Office Equipment & Supplies
...last August and it has run great but my recent problem is with the smear across the page. Is this a sign of a bad imaging unit? Anyone around Mooresville, NC? i would start with replacing the magenta ...
...unit, the problem of the faded black prints go away. If you have less than 7000 prints, you can call Samsung for a warrantied replacement. The Imaging Unit is supposed to last at least 20,000
...imaging drum. It is the shiny green metallic cylinder in the bottom back of the printer. It is the last piece to come out when you remove the toner waste unit and then all the toners. It sits on the ...
Question about Konica Minolta Office Equipment & Supplies
...last time the machine was cleaned, Gradation? and Registration? test done. Image units toned up? High end copier likes this needs to be keep up!!!!! As for the imprints replace the FUSER UNIT (HOT ...
Question about Konica Minolta Office Equipment & Supplies
Model 600. Why is it dropping toner near transfer corona unit? When is the last time the developer and drum where replaced? When the last time was a PM done? Very 250,000 copies a PM must be done? ...
Question about Samsung Office Equipment & Supplies
...Imaging Drum. It is the Shiny Green Metallic Cylinder in the bottom back of the printer. It is the last piece to come out when you remove the toner waste unit and then all the toners. It sits on the ...
208 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions