Konica Minolta Bizhub c203 Copier "idc sensors" Questions

belt unit is damaged.Reinstall or reconnect IDC sensor shutter or connector for every color unit and clean the sensors when vacuum cleaner after remove the all imaging units and the transfer belt unit

where is the IDC sensor part in the machine am unable to find the part of the IDC sensor as i dont know which one is the IDC sensor Well first I need to know the model #####?

...IDC sensors are located under the transfer belt on the right sid eof the machine. Belt must be removed to clean sensors. Once belt is removed sensors are located on a black plastic frame and have ...

...run tcr gives error code 6. machine says operating,but does nothing. Check the following , Dirt of IDC sensor, Clean up the IDC sensor, if no then Printer control board abnormality Replace ...

...DC output is 0 or lower. Associated Parts: • Printer control board (PRCB) • Developing unit /K • IDC sensor (IDCS) • IDC shutter solenoid (SD3) Remove the black (K) Drum. behind and toward the ...

where is the IDC front sensor in konica minolata C450 there is a problem in the sensor but m unable to find which one is the IDC front sensor Located under the transfer belt, which mean the belt has ...

Konica Minolta c7000 error c2840 idc sensor error. Gamma Correction abnormility check and re-install process units check Transfer belt cleaner and idc windows open properly.

...? All density readings taken from the density pattern produced on the Transfer Belt are 0.5 g/m2 (IDC Sensor photoreceiver output) or less during max. density adjustment (Vg/Vdc adjustment). ? All ...

error p5 in konica minolta c450 how to solve the problem IDC/Registration Sensor in konica minolta bizub c450 Clean them located under the transfer belt when it is removed. after which you need to ...

how do i shut idc sensor shutter on konica minolta c25 transfer belt Sensor is not on the belt it is in the machine