Sanyo DP32649 31.5 in. TV "program weak signal" Questions

weak or no signal message. it worked fine earlier no signal been trying for 10 hours to play with remote control and program under CHANNEL all versions without luck. what shall i do? Since my problem

...Program Channel Scanning function will not pickup the same channels as previously programmed. The auto scan feature scans the various channel frequencies looking for a signal. Weak signals may be ...

...Weak Signal you will have to do the following. 1) Connect an Antenna or Cable to the input on the back. 2) Go into the Channel signal source menu and select either the Air/Antenna or Cable option. 3) ...

Weak Signal" error and you have not set up the HDTV then you should do; 1) Connect a signal source - either ANTENNA or CABLE. 2) Go into the Channel/Signal menu on your set and select signal source. 3

...Program or Weak Signal" I just bought a 42' HD Flat screen TV for my family. When we try to play VCR tapes, we get an error message: "No Program or Weak Signal" flashes on the screen. We are able to ...

...weak or no signal. How do I fix this? To get any HDTV to work this is what you have to do; CHANNEL section 1) Connect your antenna cable which you have done. 2) Go into the menu to the source option ...

...program clips. Im using optical cable fra the LG TV to a LG HT. Just try connecting the input to another TV and check whether the same problem comes.   If it does, the problem is with the ...

hdmi inputs not working, componet inputs do. It is just saying weak signal or no program. jvc lcd 47 inch Has the back of the TV been taken off recently while the tv was on?

sparkler colors flckering on screen This usually happens when you have a weak signal. Check the connects between your TV and your program source.

...is using tv input If the input signal is weak, this might happen. Try the TV tune in by any on air program, and make sure that the TV is right. The