Sanyo DP42849 42 in. HDTV "bad con" Questions

Ad

Question about LG Televison & Video

1 Answer

...CON board could be bad. Sometimes you can disconnect and reconnect the flat cable(s) to the T-CON board and solve the problem. Else you can replace the T-CON board. The T-CON board is the board that ...

Ad

Question about Sanyo Televison & Video

2 Answers

...idea? Bad t-con board or bad LCD panel.  T-con board at Encompas Parts about $50. It sounds like you have a bad t-con board.You can get get parts for this tv at ...

Ad

Question about Element Televison & Video

1 Answer

...Bad T-Con board or a bad panel. Dark screen usually caused by no backlight. T-Con board is the smallest board, usually at the top of the panel assembly. Some T-Cons are integral with the panel and ...

not clean .. problem is t-con or bad panel !! thanks help me :-) I would like to send pictures ..!! but no this !! If your picture on the screen is distorted the problem is most likely the t con board

Question about RCA Televison & Video

1 Answer

bad contact in the connections on the t con board. Remove and reconnect all the connections on the con broad. if the problem exist even after that you have to go for a new t con board . in some tvs 32

Question about Sanyo Televison & Video

1 Answer

...bad t-con board. Take back off tv. In the top center is a cover with two small phillips screws. take these off and fold cover over. Check and make sure connectors are seated good. If still no help, ...

Question about Vizio Televison & Video

1 Answer

...see any bad caps.Did notice when first turned on heard a low crackeling sound by the board at top center,think its called t-con,little square board 5x7 its a bad t-con, or different t-con for new ...

...bad or what could it be? Sounds like you have a bad T-con (timing control) board check this article for pics to compare and more info.Bad T-Con boards, Ribbon and LVDS CablesReplacement T-Con ...

Question about Westinghouse Televison & Video

1 Answer

...bad T-Con board blow the power supplies or does it just send an auto shut down signal to the power supply? I now have two power supplies which may or may not be bad and suspecting that T-Con board. ...

bad contact in the connections on the t con board. Remove and reconnect all the connections on the con broad. if the problem exist even after that you have to go for a new t con board . in some tvs 32

Not finding what you are looking for?
Sanyo DP42849 42 in. HDTV Logo

223 questions posted

Ask a Question

Usually answered in minutes!

Top Sanyo Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Sanyo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...