Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher "broken door elite dishwasher" Questions

springs are located at the left and right side of the door bottom. You will have to pull the unit a few inches from the installed location to see them. If broken, replace. If one slipped off, reattach

...door spring kenmore elite built in dishwasher I have just done this on my own dishwasher, and managed to bend the next curl of the springs to replace the broken ends, see instructions and pictures ...

Plastic part connected to door spring is broken. Where can I buy the part? Kenmore Elite model 665.1315 From sears

door spring is broken.usually with time the rope wears out and break.it is preety easy fix. u have to pull the unit about half way out and look for ropes on lhs and rhs bottom of the unit.buy the rope

catch the lid by snapping onto a plastic lip? If so it may well be broken off and thus require a whole new dispenser at $72. Yes its probably the little latch that holds the door closed thats worn out

broken apart on my hardwood floor. They appear to be dropping from the bottom of the dishwasher door. Today I found similar chunks sticking to the bottom interior of the dishwasher. I was able to pull

...but this usually only happens from opening a heavy load of dishes on the door. Occassionaly a broken spring or cable occurs. You will need to remove the toe kick and maybe the front panel to

...door is broken; it seems that if you let it go it will fall to the ground. Has a spring/cable broken, It is a Sears Kenmore Elite model # 16984200. Can you tell me the part cosdt for the item? Thank ...

...door opens too fast, broken spring? Could be that, the spring may have unhooked or it could be a defective damper connected to the door. Remove the side panels and check the operation of the door ...

...reset.2) See for any wires broken, burn, or loose wires repair.3) test the switch door, if are open the starting relais will not move the motor see the diagram.4)see the test that you can ...