Question about Kenmore Dishwashers
...wash on the control pannel. it is a Kenmore Elite dishwasher model 665.1392 The 4 hour delay light is on at the control panel. How do I cancel the function? Press cancel. If the 4 hour delay is still ...
elite model 16574 When u shut the door on dishwasher cleaning light will flash on and off but when u push button to wash it will not work press (high temp-wash) button and then ( heated dry) do that 3
Question about Kenmore Dishwashers
elite (roughly 5 years old). . I have checked the breaker and power seems to be going to the machine. What buttons do I push to get started? The buttons must be pressed in the following order: "Heated
Question about Kenmore Dishwashers
...elite ultra wash. It seams to be cleaning the dishes, but a short time after the wash is started the sensing light will come back on and then the timer will stop going down. The washer will continue ...
elite dishwasher model 630 Smart Wash light is flashing The light is flashing and I can't get it to start. You may want to try: Press a series of four buttons in quick succession. Press "Heated Dry,"
...short cycle and then stopped. I had to start he washer all over again. It working so far. I have had the same problem with my Kenmore Elite dishwasher. After calling Sears to get some sort of help on ...
...Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code ...
Question about Kenmore Dishwashers
...wash light on my kenmore elite model 66513753K602 is flashing. I have tried the suggested button sequences to reset it and they have not worked. How do I troubleshoot it to determine which part(s) ...
...Elite Dishwasher model#: 665.16592201 serial #: FP1003581 Dishwasher doesn’t operate. Light on front is lit with “- -“ If you push the cancel button on the front, it acts as a toggle switch either ...
elite 17262 apart because it was not getting the top rack clean and the soap was not being used up- i.e. low water pressure. The short story - Misc. objects were clogging the screen/grinder, I cleaned
291 questions posted
Usually answered in minutes!
485 Questions
206 Questions
161 Questions
175 Questions
145 Questions