Nikon D3000 Digital Camera "remove lens error" Questions

...remove the lens, and clean all contacts both from the camera and the lens, with a dry and clean cloth. Don't use any sharp tool in or close by a camera. After cleaning, refit the lens. If the error ...

...Remove the lens being careful not to get dirt/dust in the camera(very important). Clean the metal contacts around the lens and on the camera where the lens and camera meet. Your error sounds like a ...

...Remove lens, clean contacts, reattach lens. Now give it a little wiggle to seat the contacts. Does that help? ?? what lens? contacts of camera-lens not connecting or using AF-D lens(not compatibel ...

remove the lens cap,and the turn the camera on) The above error message is their despite i opend the shutter of the lens. Kindly help me to know the above problem. Hi, Here is a tip that I wrote about

...lens for any obvious obstruction, then turn the camera off, then on again. Usually, simply switching the camera Off then On again is enough to correct this problem. Remove and recharge and/or replace ...

Remove the lens and check if al contacts are in good order (no dents), clean and shiny if they look good to you, replace the lens and switch on the camera. If the error returns, the best thing you can

...remove lens from camera body I was trying to take picture from my D90 with kit lens of 18-105mm. But was unable to shoot any photos. Shutter release was disable (unable to press), when look thru ...

...lens, remove lens and clean contact, and talking very sweetly to the camrea. Nothing worked and the same messages is displayed when i turn the camera on. Any advice? This may be due to the aperture ...

...remove the lens and check the mirror opening..see if there is some thing stuck there. You can try to click the shutter while the lens is removed. If this procedure didn't work I suggest calling Nikon ...

...lens, remove lens and clean contact. Nothing worked and the same messages is displayed when i turn the camera on. Any advice? You did not mention what error mesage you got. If it is a flashing "F--" ...