Nikon D3000 Digital Camera "attach lens cover" Questions

lens not attached error remained If you remove the back cover, there is a flexible circuit on the bottom left that attaches to the rear circuit board. Check to make sure that there are not cuts in the

...properly on FX cameras, since the smaller DX lens won't always capture the full images needed to cover the larger FX sensor. Some FX cameras automatically switch to DX mode when it detects a DX

...rubber covering screws on the bottom. Pry up just a small section and then put some alcohol at the attached edge and move it back and forth slowly with a removal tool. If you just rip off the rubber ...

...lens, card, and battery then attach these only for diagnosis and testing. While waiting for repair, everything is removed, the technician is unable to find anything wrong when he puts everything ...

- have all the pieces but can't figure out how the springs attach. This link has some examples of repair of the automatic lens cover. It may help you figure out how to reinstall the lens cover springs

lens cover stays partially open and won't close with the lens retracks. I can see two tiny springs inside by the front lens and one spring was not attached on one end and came out of camera. What&

...attach. Should I fix it when the camera is switched on and the lens is in the open position? You can e-mail me on [email protected] Thanks Des you can view and touch broken portion in on ...

...lens cover and possibly having a failure there. I am shocked you aren't having power up issues because that lens cover must make a micro switch to supply power to the camera. I am having to apply ...

lens. Remember also the screw just above the wrist strap loop. 32. Slide back the battery compartment cover onto its metal strip. Insert battery & memory card. Attach wrist strap. Done! Stephan i have

...lens cover, http://stores.ebay.com/DarnToothySam has lens flap/cover repair, email him if you don't see your camera there. For the lens cover issue: Try blowing lots of compressed air around the open ...