LG SteamWasher WM2801H Front Load "steamwash spin" Questions

LG SteamWash leaks water during use, or water pools after spin cycle (clothes are soaked) you need a new timer switch it is what the knob is hooked to

Tromm washer rinses the clothes but doesn't empty the water/spin The washer just makes a running noise and doesn't rinse the clothes and the water just sits in the barrel and won't spin. clogged pump ...

won't spin and water is left and error message 3d won't spin and water is left and error message 3d is showing Please check the program controller unit and also the drain pump which could ...

I have an lg washer wm2077cm and it goes off balance when the spinning cycle starts and the stops. Sometimes if the heavy bed spreads or curtain may cause this problem. Switch OFF machine manually and

my machine wont run, i replaced the drain pump and thermostat sensor. after replacing drain pump, my washer ran almost a full cycle, stopped during the last rinse wont run now. It turns on but doesn't

vibration during spin cycle During the spin cycle my lg tromm steam washer has a terrible vibration.Any suggestions? Unless your front loader is set firmly on concrete and leveled to perfection, the ...

My LG Tromm is turning on, but the basin is not spinning at all. Does this model have a belt? no there is no belt on lg washers,the unit is magnetically spun by the stator assembly behind drum

WHAT DOES IE STAND FOR? THE WASHER GOES THRU THE WASH And stops aND IE APPEARS AND WASHER STOPS AND IT WONT SPIN LE = MOTOR IS BLOCKED Faulty open circuit wiring to stator assembly.

Why does Washer smokes after spin cycle Nothing .was wondering if belts were involved Yes. The belt is stretch out and not keeping up with pully

It's showing LE code is your motor spinning at all, if it is slow moving then you have a problem with your stator assembly...........need to replace a part for your stator............ just email me ...