How do you access lid switch to replace it? useing a butter knife you can push tabs in front area to release lid (there in the crack)
...in when the lid closes. if you can push in on the switch with a small screwdriver or butter knife and the machine runs, then that is your problem. closing the lid had sounds like a switch ...
lid are. push these in (hard) with the butter knife and this will release the front panel. once the front panel is off you will be able to see the belt under the motor. look at the pulley on the motor
...lid off, and if so, how ? The switch should be under the control panel,,,, which should be easily removed by inserting something flat such as a butter knife, or flat head screw driver in the front ...
Question about General Electric Washing Machines
...the motor engage but nothing spin or aggitate. Check the belt and clutch in the front under the lid run a butter knife under the lid and pop the front off and take a look.Have a great
...lid lock part? top/front of washer seperates by way of hidden clips. insert putty knife or butter knife between front seam of cabanet and top. about 2 inches from left side and 2 inches from right ...
...lid up. To open the top use a putty knife or butter knife at the joint of the top and bottom at the front corners to push the catch in while lifting the top. On an older machine the lid switch goes ...
How to get the lid to the salad spinner apart? Butter knife.
lid itself there should be a plastic plunger. it may have broken off. There it will never trigger the switch. If you like try a plastic butter knife, with the timer set to go and water in the machine,
...you can raise the lid a little and use a butter knife to push the plunger in all the way. sometimes these dont get set in right. double check it. you should hear a little click when you push
466 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,642 Questions
1,023 Questions
