Kenmore 43052 Front Load Washer "final spin really loud" Questions

...final spin There is a really loud sound like rocks spinning in the machine. It is definitely there during final/fast spin - not sure about other spins. The rear drum seal has leaked water into the ...

...final spin cycle washer is really loud at final spin cycle sounds like its gonna take flight!! now it wont spin clothes out fully at end of cyle even if put on spin again. There are two speed (or ...

...final spin cycle, empty drum still has squeak and doesn't spin freely The squeak seems like it at one point in each revolution, but unsure. Today it got really loud during spin cycle. I stopped it, ...

...spin cycle - both at 15 minutes (softer) and at the final 5 minutes (really loud). hi,this sounds very much like the bearring have worn out,to check this open door and lift silver drum up and down if ...

...final spin whrilpool washing machine is fine until the high speed spin cycle then it makes a vibrating noise that is really loud. I wonder if there are springs holding the basket that is the problem ...

...final spin it makes really loud banging noise. Have removed back and I am able to push and pull on the main pulley. It moves about 1/2 inch forward and backward. Up and down seems like there is no ...

...final spin cycle Anybody know what I need to do make sure the transport tie downs have been removed during installation and that all four feet are adjusted properly so machine does not rock.Also make ...

...final spin cycle. I'm sure this is probably an easy thing to diagnose, but I really just don't know where to start. again it is a kenmore front loader. please balance your washer and use smaller ...

final spin cycle. What's the problem? If you want to take the time, I just replaced my drum bearings and seal for $62.00. No really any special tools needed. My model showed the bearings were not sold

...final spin cycle, our front loading whirlpool is making a really loud noise - it sounds like a train is going through the house. It is in the basement on a concrete floor. If the washer is brand new, ...