Kenmore 22422 Top Load Washer "runs stops heavy duty" Questions

...heavy duty fast/fast setting It agitates and seems to be working very hard then stops. it starts for awhile then stops again. There is also a smell of hot metal. By the way its a Kenmore model 110, I ...

...stops top load 80 series heavy duty super capacity plus, I've applied a little downward pressure to the top of the agitator, which makes it agitates better! hum either a bad timer sticking the point ...

...Heavy Duty blanket). Time remaining is flashing and machine won't continue. Door is locked....Help!!!! With a heavy blanket you probably have an out-of-balance condition which doesn't let the machine ...

...heavy duty king size top loader water will not stop running to the liquid detergent dispenser even when the tub starts filling Causing the machine to over flow could be the water valve not closing ...

...heavy duty extension cord into a circuit at the other side of the house. Nothing! I have the same problem. Model: LAT2300AAE Serial: 30220055ZM Maytag Performa - does anyone have any advise or should ...

...Heavy Duty electric dryer, the dryer run non-stop even on auto-dry mode (timer doesn't advance) but the clothes aren't drying either. Timer will not advance unless the element is working. Suspect bad ...

...Heavy Duty 70 series model 11092575110. It has been running perfect and suddenly it has stopped with a load of clothes and water. Please advise. Thanks As power reaching the machine? Is the motor ...

...heavy duty top loader My washing machine stopped running and no matter what cycle I turnedit to all it did was make a clicking sound. Now the clicking sound stoppedand it will not do anything. I ...

...Heavy Duty two speed with Handwash model. The water will not stop running it just keeps going and eventually overflows. Im thinking the sensor has some issue but dont know where it is located on the ...

...heavy duty 70 series washer that is slowly leaking into the tank when it is not running. What to do? If I turn off the water to the machine, the leak stops. Sounds like the inlet valve is leaking you ...