...error, but i replace new motor brushes You can reset the error code by the follow steps. Turn the knob to the off or reset position, 12 o'clock. Turn the knob to the 6 o'clock position. Press and ...
...a problem with the motor or control board.Here's what you should do;Turn the appliance knob to the off or reset position,12 o'clock.Turn the knob to the 6 o'clock position.Now ...
Question about Frigidaire Washing Machines
...mode to run to look for the errors. The diagnostic test is performed by using the Program Knob. To START THE TEST: ? On non-digital display models, turn the Program Knob to start position, ...
Question about Bosch Washing Machines
...a hiccup. Try the following six steps to clear the code, then see what hppens: ·Turn the appliance knob to the off or reset position, 12 o'clock. ·Turn the knob to the 6 o'clock position. ·Press and ...
...a hiccup. Try the following six steps to clear the code, then see what hppens: ·Turn the appliance knob to the off or reset position, 12 o'clock. ·Turn the knob to the 6 o'clock position. ·Press and ...
...look at your control board. You can reset the error code by the follow steps. Turn the appliance knob to the off or reset position, 12 o'clock. Turn the knob to the 6 o'clock position. Press and ...
...it is also caused by spikes in the mains and can be spurious. To reset it. Turn the appliance knob to the off or reset position, 12 o'clock. Turn the knob to the 6 o'clock position. Press and ...
Question about Bosch Washing Machines
...motor fault".
You can reset the error code by the follow steps:
1. Turn the appliance knob to the off or reset position, 12 o'clock.
2. Turn the knob to the 6 o'clock position.
Question about Bosch Washing Machines
how do i reset code F21 to a Bosch Maxx 7 washing maschine? Turn knob to 12 o'clock position turn to 6 o'clock position press an hold the spin button turn knob to 7 o'clock while still pressing the ...
...knob turns, but it does not spin. it will spin if i turn the knob to spin (i've been doing that for months). i also noticed, when this happens, that the knob is about a 1/4 of an inch before the spin ...
1,909 questions posted
Usually answered in minutes!
3,839 Questions
3,158 Questions
2,098 Questions
1,023 Questions
908 Questions