Question about Simpson Washing Machines
...pressure set by the knob it does 2 things it turns off the inlet water solenoid to stop water coming in and then starts the wash cycle as it is starting the wash cycle , it indicates that the stop ...
Question about Simpson Washing Machines
...pressure to escape. Also check that water valve is stopping the flow. Start to fill then press pause. Water flow should stop immediately. If it keeps flowing or is slow to stop then replace the inlet ...
Question about Admiral Washing Machines
...the end where the hose was connected. if the water stops then you will need to replace the pressure switch hose. if the water doesn't stop coming in then you will need to replace the pressure ...
...pressure switch click and feel resistance. Now you can put the tube back on, start your machine and monitor to see if it stops filling and start agitating properly, just doing that will work many ...
...up and will fault and stop running in a matter of 2 minutes or so You may have a problem with the pressure dome hose (has a cut or kink in it) or it may be a problem with the main control board. ...
...drain hose goes to when emptying)If not,Either the pressure switch is broke or there is a hole or split in the pressure switch rubber hose.This switch stops the water when it reaches required
...pressure switch water level. If I press the star button, the machine starts filling up and only stops when I press agian the star button Te pressure switch has a tube attached, try blowing out tube, ...
...this pressure setting is not met within the three minutes,the machine will stop, this sounds like the drain might be slightly blocked try there first, and then the drain pump and sump of the
Question about Whirlpool Washing Machines
...pressure switch click and feel resistance. Now you can put the tube back on, start your machine and monitor to see if it stops filling and start agitating properly, just doing that will work many ...
...stops at the low level great Now if it continues to fill and does stop you may need a pressure switch or the hose needs to be replaced that runs from the tub to the pressure switch. Now set at the ...
3,909 questions posted
Usually answered in minutes!
3,839 Questions
2,098 Questions
1,642 Questions
1,023 Questions
908 Questions